- This topic has 1 reply, 1 voice, and was last updated 1 year ago by .
So here we are.
I am using FL Studio for this plugin
my settings for my supernova 1 are following:
SUPERNOVA OS 4.1
Global Midi chan 1
Midi in /out (whatever you have connected) my case midi in/out 4 (turn off midi chanels on midi channel settings on fl studio before launching the plugin)
-allow control on prog change
-midi filter settings : advanced incoming – all on
advanced outcoming – second option
midiclock – second option
manual buffer adjustment – as it is
-When connected it says ´´Connecting to supernova II´´ even tho i have supernova 1 (dont know if it matters or not)
-while pressing buttons on the plugin it does not change on the hardware with lights, but while pressing on hardware you see the changes on the plugin
-buttons/knobs react both from hardware & plugin while using both
-librarian does not sync with hardware
-while selection patch on plugin it does not change the sound, still remains the same
-when pressing sync data from hardware – results shows: connection timed out
-Master volume,master tune & tempo knob on Global & Performance settings does not react at all
that is all i got for now.
hope this helps a little
STUDIO GEAR: RME FIREFACE 802, ALESIS AI3, EVE AUDIO SC 207, ROLAND JP8000, ROLAND JP8080, NOVATION SUPERNOVA, ACCESS VIRUS A, WALDORF PULSE, ROLAND SH201
The topic ‘Supernova 1 reports – Novaline’ is resolved and closed to new replies.